FY-41AP
FY-41AP is a model level autopilot, integrated with OSD function, power management module, airspeed sensor, air pressure altimeter, electronic compass, combined with attitude control and GPS positioning to realize inertial navigation and autopilot, mainly used for FPV flight of fixed-wing aircraft and multi-rotor aircraft.
Manual Mode
In this mode, FY-41AP is completely uninvolved in control, and the control of the aircraft is entirely determined by the operator.
Stabilize (ABM)
FY-41AP can automatically maintain the aircraft's horizontal flight attitude. This is very easy for those people who are just begin learning to control a model plane. When you feel the aircraft is going out of control, just stabilize the throttle and release the remote controller, and the plane will automatically return to the horizontal position.
3D mode
In this mode, the plane will maintain the current flight attitude after releasing the remote controller, which can make you control your plane to do all kinds of aerobatics.
GPS mode
In this mode, the plane will lock its flight direction and altitude.
Circle mode
The aircraft will keep its current altitude and circling at a certain speed rate (Seen from below, the circle direction is anti-clockwise) . And the FY-41AP has a minimum circle altitude limit of 50 meters, if the plane’s current altitude is below 50 meters when it starts to return to home point, the plane will automatically climb to 50 meters to keep it can fly at a safe altitude.
Mission mode
In this mode, if the FY-41AP connected with a GPS module, the plane will fly along the waypoints in Mission mode( Maximum amount of waypoints is 20)
Return mode
In this mode, the aircraft will return to the home point at current flight altitude and circle around it. And the FY-41AP has a minimum circle altitude limit of 50 meters, if the plane’s current altitude is below 50 meters when it starts to return to home point, the plane will automatically climb to 50 meters to keep it can fly at a safe altitude.
OSD
The built-in OSD system can overlay flight data onto the video, with brand-new figure superposition module, the operator can see many kinds of flight information clearly, such as altitude, airspeed and flight direction .etc.
GCS software
GCS software is used to set flight parameters, plan flight missions and monitor flight status. Software integrates electronically map function, you can load the real map of Google Earth into the GCS software so that you can see the aircraft’s current position in real time. GCS software also can change the flight speed, altitude and direction of the aircraft in real time, make your flight more convenient and easy.
